Anmol Chemicals is the pioneer manufacturers of Sodium Bromide, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Sodium Bromide made in an ISO9001:2008, ISO22000:2005 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium Bromide is in these pages.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Home -------------------- Contact

Drum Packing Palletized Drum Packing Palletized & Shrink Wrapped. 25 50kg HDPE Laminated Bags. Exports to USA UAE Europe Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai Sodium Bromide Manufacturers

Sodium Bromide SDS GHS, MSDS Sheet

Specifications of Sodium Bromide

Sodium Bromide SDS GHS, MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product Name: Sodium Bromide
Synonyms:
Sedoneural; Sodium Bromide
CAS No.: 7647-15-6
EINECS EC Number: 231-599-9
Molecular Weight: 102.89
Chemical Formula: NaBr
Intended use: Laboratory Chemicals and Industrial Manufacturing Use.

2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
NONE

Signal Word: None

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May Causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

3. Composition/Information on Ingredients

Ingredient: Sodium Bromide
CAS No.: 7647-15-6
EINECS EC Number: 231-599-9
Percent: 100%

4. First Aid Measures

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Call a physician.
Skin Contact: In case of contact with Sodium Bromide, immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Call a physician.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Special hazards arising from the substance or mixture: Hydrogen bromide gas, Sodium oxides

6. Accidental Release Measures

Ventilate area of leak or spill of Sodium Bromide. Wear appropriate personal protective equipment.
Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Do not let product enter drains.

7. Handling and Storage

Hygroscopic. Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established for Sodium Bromide.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: Sodium Bromide is white crystals, granules, or powder.
Odor: Odorless.
Solubility: Sodium Bromide solubility is 116 g/l00 g water @ 50C (122F)
Specific Gravity: 3.21 for Sodium Bromide.
pH: 5,4 at 50 g/l at 20 °C.
% Volatile by volume @ 21C (70F): 0
Boiling Point: 1390C (2534F)
Melting Point: 755C (1391F)

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage. Absorbs moisture from air.
Hazardous Decomposition Products: Oxides of the contained metal and halogen, possibly also free, or ionic halogen.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acids, alkaloidal and heavy metal salts, oxidizers, and bromine trifluoride.
Conditions to Avoid: Moisture and incompatibles.

11. Toxicological Information

LD50 Oral - Rat - 3.500 mg/kg
LD50 Dermal - Rabbit - > 2.000 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.

12. Ecological Information

Toxicity to fish: mortality NOEC - Oryzias latipes - 7.800 mg/l - 96 h
LC50 - Poecilia reticulata (guppy) - 160.000 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: mortality NOEC - Daphnia magna (Water flea) - 7.800 mg/l - 48 h
EC50 - Daphnia magna (Water flea) - 5.800 mg/l - 48 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Sodium Bromide container and unused contents in accordance with federal, state and local requirements.

14. Transport Information

DOT (US): Not dangerous goods
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods

15. Regulatory Information

USA:
SARA 311/312:  None
SARA 313: Not applicable
CWA (Clean Water Act): Not applicable
Clean Air Act: Not applicable
OSHA Occupational Safety and Health Administration: Not applicable
CERCLA: Not applicable
California Proposition 65: This product does not contain any Proposition 65 chemicals
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No

Canada WHMIS: Not controlled under WHMIS (Canada).

EINECS EC Number: 231-599-9

16. Other Information

Disclaimer:
*********************************

Our company provides this Sodium Bromide SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium Bromide MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
*********************************

Sodium Bromide manufacturers at:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Anmol Chemicals

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan,etc.

Copyright and Usual Disclaimer is Applicable. 13 March, 2016

 

Sodium bromide manufacturers